Philips ActiLume DALI

Description

The Philips ActiLume DALI lighting control system consists of a small, lightweight sensor and controller, designed for easy integration into luminaires. ActiLume is a true Plug and Play solution for open plan or cell offices. It is used in a master/slave luminaire concept, easy to use and easy to install. Application brochures are available to help specify and apply the system in an optimal way.

Benefits

• A DALI based lighting control system designed for maximum comfort and energy savings up to 75% (in fully automatic mode and when used in combination with Philips HF-Regulator Touch and DALI ballasts)

• ActiLume is a Plug & Play system, no specific lighting control training is needed: The system is supported with simple, dedicated application and installation sheets

• The light sensor is sensitive for visible radiation (matching the human eye) providing automatic savings with daylight depending regulation, without any visible discomfort for the user

• The movement detector is very sensitive to human movements and contains a 15 minutes delay timer to provide optimal functionality whilst maximizing energy saving during absence

• Personal control solutions can be created by connecting a mains rated spring-back switch to the controller or by using an infrared remote control unit

Features

• The ActiLume system consists out of three state-of-art miniature sensors combined with a controller containing a series of pre-programmed modes

• The two most applied modes, cell and open plan offices, can be selected via a single push on the service button

• ctiLume offers the possibility to select so called “comfort modes” in line with the EN 12464 indoor lighting norm. These modes can be recalled by using a simple mode selection tool IRT9090

• If needed, further customization can easily be established by changing the factory settings with the mode selection tool IRT9090

• The ActiLume controller contains two DALI outputs. These outputs are pre-programmed (factory setting) as a window and corridor row with a fixed light offset

• ActiLume Dali can control up to 11 ballasts

• The system can be extended with 1 or 2 additional movement detectors, LRM8118 and/or LRM8119 to maximize movement coverage. This respectively reduces the number of ballasts per controller to 10 or 9

• Factory light level setting is at 600 lux at a reflection factor of 0.3

Applications