Products
| Product | Compare | ||||||
|---|---|---|---|---|---|---|---|
 MASTER TL-D Xtreme 18W/830 SLV927980383014 | 18.0 | 1,300 | 3000 | - | G13 | Medium Bi-Pin Fluorescent | ||
MASTER TL-D Xtreme 36W/830 SLV927982383014 | 36.4 | 3,200 | 3000 | - | G13 | Medium Bi-Pin Fluorescent | ||
MASTER TL-D Xtreme 36W/840 SLV927982384014 | 36.4 | 3,200 | 4000 | - | G13 | Medium Bi-Pin Fluorescent | ||
MASTER TL-D Xtreme 58W/865 SLV927983386514 | 58.9 | 5,000 | 6500 | - | G13 | Medium Bi-Pin Fluorescent |
Product family information
Description
This MASTER TL-D Xtreme lamp offers extremely long lifetime. This results in extra-low lamp cost over life. It is therefore suitable for places where lamp replacement is expensive, due to high ceilings or disturbance of operations, and applications with long burning cycles, e.g. tunnels, oil rigs, manufacturing lines. It can be operated on existing gear or dedicated HF Xtreme gear.
Benefits
Extremely long lifetime - up to 10 years of operation - results in lower maintenance costs, less waste and disposal costs at end-of-life
Less hassle due to fewer early failures
Features
Extremely long lifetime - up to 10 years operation; longest lifetime is achieved with special designed Philips HF Xtreme gear
End-cap has an x-shaped green bottom plate to distinguish the lamp from other fluorescent lamps
Applications
Warning & Safety
To achieve published lifetimes for 100% operation, do not dim below 30%
When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.