MASTER TL5 High Output

Description

Low-pressure mercury discharge lamps with a tubular 16 mm envelope

Benefits

• Allows system miniaturization and maximum luminaire design freedom

• Allows system miniaturisation and maximum luminaire design freedom

• Lamp lengths enable easy fitting into ceiling module systems

• Lamp lengths enable easy fitting into ceiling module systems

• Optimized for installations which need high luminous flux

• Optimised for installations which need high luminous flux

• Virtually constant lumen level with excellent lumen maintenance

• Virtually constant lumen level with excellent lumen maintenance

• Good color rendering

• Good colour rendering

Features

• 40% thinner than TL-D lamps

• 40% thinner than TL-D lamps

• Designed for high llight output and system miniaturization

• Designed for high light output and system miniaturisation

• Highly efficient 3-band fluorescent coating in combination with precoating

• Highly efficient 3-band fluorescent coating in combination with precoating

• Specifically designed for operation with electronic gear and well-suited for dimming

• Specifically designed for operation with electronic gear and well suited for dimming

• Maximum light output reached at approximately 35 °C in free-burning position if an electronic driver with cut-off feature is used

• Maximum light output reached at approx. 35 °C in free-burning position if an electronic ballast without additional electrode heating is used

• Can be ignited from -15 to +50 °C

• Can be ignited from -15 to +50 °C

Applications

Warning & Safety

• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.

• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.