Philips HF-Regulator II for TL-D lamps

Description

Flat, lightweight high-frequency electronic regulating ballast, using 1-10V protocol for TL-D fluorescent lamps

Benefits

• The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)

• The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)

• Compliant with European and Asian norms and suitable for emergency lighting systems

• Compliant with European and Asian norms and suitable for emergency lighting systems

• HF operation improves light quality, lamp lifetime

• HF operation improves light quality, lamp lifetime

• Combined with controls, additional energy savings can be achieved

• Combined with controls, additional energy savings can be achieved

Features

• Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life

• Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life

• Smart power ensures constant light, independent of mains fluctuations.

• Smart power ensures constant light, independent of mains fluctuations.

• Up to 60% reduction in energy consumption by using automatic lighting control systems

• Up to 60% reduction in energy consumption by using automatic lighting control systems

• Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement

• Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement

Applications