MASTER SON PIA Plus

Description

High Pressure Sodium lamp with opalized ovoid outer bulb, high output and long reliable lifetime

Benefits

• High efficacy/lumen output resulting in low energy cost

• Superior technology results in a long and reliable lifetime, high lumen maintenance and a reliable ignition over lifetime

• Long and reliable lifetime reducing maintenance cost

• High energy efficacy and absence of lead (Pb) makes this a sound environmental offer

• Constant light over lifetime

• High luminous efficacy makes this the most energy efficient HPS lamp

Features

• Ovoid, white coated outer bulb

• Ovoid, internally white coated outer bulb

• Ceramic discharge tube with Unique Philips Integrated Antenna (PIA) concept enabling long and reliable lifetime

• Ceramic discharge tube with Philips Integrated Antenna (PIA) for a long and reliable lifetime

• "Plus" concept with high efficacy translates into high light output and improved lumen maintenance

• Robust construction with few welding points is highly vibration- and shock-resistant, further reducing early failures and extending lamp life

• Robust construction with few welding points is highly vibration- and shock-resistant, further reducing early failures and extending lamp life

• ZrCo getter ensures high lumen maintenance and few early failures

• "Plus" concept with high efficacy translated into high light output

• Completely lead-free lamps

Applications

Warning & Safety

• Control gear must include end-of-life protection (IEC60662, IEC 62035)

• Control gear must include end-of-life protection (IEC60662, IEC 62035)

• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.

• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.