Philips HF-Performer III for TL5 lamps

Description

HF-Performer III TL5 is a sustainable, slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT).

Benefits

• Exceptional energy efficiency with striation-reduction technology in lighting systems at lower temperatures

• Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution).

• Maximum reliability in system operation

• The programmed start enables the lamp to be switched on and off without reducing useful lamp life.

• Multi-power technology for precise operation of multiple lamp types of various wattages

• DC emergency operation in line with IEC/EN 60598-2-22 luminaire norms

• Suitable for luminaires in protection class I and, after testing, class II

Features

• Highest CELMA Energy Efficiency Index A2 BAT

• 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp

• Complies with CE, ENEC, EL, VDE-EMC, CCC marks of conformity

• Programmed, flicker-free, pre-heated start (< 1.0 s) which allows the lamp to be switched on and off without reducing useful lamp life

• Average nominal service lifetime over 100,000 hours (at Ta 50 °C) with a failure rate ≤ 0.1 % per 1,000 hours)

• Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations

• Optimized lamp preheating for over 50,000 On/Off switch operations without replacement of lamps

• The unit is protected against excessive mains voltage and incorrect connections

• The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring.

Applications